HVAC or Plumbing: What Comes First During Construction?

Tips

In most homes around my area, HVAC systems are typically installed before plumbing. You might be wondering why this is the case, and I’ve got you covered. Let’s break it down!

Why HVAC Often Comes First

While both plumbing and HVAC are crucial systems, the reasoning behind HVAC installation coming first lies in the fact that large rigid HVAC ducts are much harder to reroute or adjust once they're in place (Flexible ducts obviously not the case).

On the flip side, plumbing pipes are more flexible. They can often be run around existing ductwork, making it easier to adjust as the build progresses. Plus, plumbing pipes are typically smaller and less intrusive, so there's more room for changes during later phases of construction.

Fitting Plumbing Around Ductwork

Though plumbing is more flexible, fitting it around bulky HVAC ducts can present challenges of its own. If ducts are installed first, it can sometimes create limitations for the placement of pipes, especially when it comes to larger drain lines. This makes it important to plan ahead and coordinate with your builder to avoid future complications.

It’s not a “one size fits all” approach—every house is unique in its design, layout, and structure. While it’s common to install HVAC first, in certain cases, it may be better to run plumbing before HVAC, depending on the specific layout and size of the home. That’s why planning ahead and working closely with your builder or contractor is essential.

The Order of Construction

Here’s an extremely shortened example of how a new construction home is built, which might help you better understand when plumbing and HVAC fit into the process! To see the full breakdown of how a home gets built, see this comprehensive guide to the steps and phases of construction.

Site Prep and Foundation
The site is cleared, the foundation is poured, and the groundwork begins. Any underground plumbing, like water mains or sewer lines, is typically installed before the foundation is fully set.
Framing and Rough-In Work
Once the foundation is complete, the framing of the house starts, and the rough-in phase begins. This is when plumbers, electricians, and HVAC contractors get to work installing the basic structure for each system. Plumbing pipes are run through the framing first to ensure proper placement.
HVAC Ductwork and Ventilation
After the plumbing is in place, HVAC contractors install the ductwork and ventilation system. Since ducts require more precise placement and are less flexible than pipes, it’s important to have them installed at this stage to avoid conflicts with plumbing.
Insulation and Drywall
Once both plumbing and HVAC are in place, insulation and drywall are installed to seal up the walls and ensure the house is energy-efficient.
Finishing Touches
Finally, once all major systems are in place, the finishing touches—like faucets, vents, and appliances—are installed. This includes any adjustments needed to the plumbing and HVAC systems based on the home’s final design.

Planning Ahead is Key!

While HVAC is often installed before plumbing, in the end, effective planning and coordination between contractors are essential to avoid potential conflicts and ensure everything fits together seamlessly.

My Ultimate Home Building Checklist is guaranteed to help you stay on top of the build process and ensure that everything is being installed at the right stage. With proper planning, your new home will be built with precision, avoiding costly changes or delays.